Vapeciga vv mods impressed since joining the vaping market and not really make a misstep. Of course, the first product to enter the heads of most people when Dovpo mentioned are the superstructure but were responsible for this very good RDA, RTA, fully regulated and potentiometer devices, and always at a fair price.
It comes with a 2 ml glass currently installed both in line with TPD but placed a drinking glass bubbles and Ultem. There was a lot of publicity about this will not affect the way I found BLOTTO can break!
1 × BLOTTO RTA (pre-installed tubes 2ml)
1 x 6 ml tubes glass bubbles
1 x bubble tubes 6 ml Ultem
1 x accessory bag
1 x User Manual
1 x opener
The BLOTTO is delivered in a cardboard box with a transparent plastic cover so you can see the RTA before the opening, there are many brands as well as all the usual specifications, etc., in the package. The BLOTTO is available in three different colors, I received from gun metal, but is also available in silver and black. Goon dripping Council and adequate 810 is very enjoyable to watch with a silver metal band around it and the opaque appearance of the silver version Ultem Black and gunmetal.
Blotto specifications and features:
Size: 26.0 (25.5 mm on the same basis) x 54.5mm (with tube 2 ml) / 32.0 × 54.5mm (6 ml tube)
Type: PDT edition 2 ml; 2 ml Standard Edition
Capacity: 2 ml (6 ml Ultem additional glass tube and the glass tube 6 ml of bubbles included)
Build a platform: support double coil or single coil
242 system airflow °
It is easy to fill in the e-juice.
double diffusion airflow for gentle aspiration
Color: Gun Metal, Silver, Black
This is followed by the base of the floating bridge, we have a standard, gold-plated, pin 510 mounted stand. space screw in the section of the platform and the glass is insured and the top and bottom sealed portion with O-ring. It is advertised as preinstalled regulation 2 ml glass TPD right, but I meet a 3 ml in him no problem. Also receive two bubble 6 ml capacity glass and squonk vape show new. Besides going to the theme in his blottoed receive double skull bottle Bogan door opening as a cutting guide wire coil. Although it comes with 2 parts glass bubble right and overall it was not surprised by what you get.
The BLOTTO used in many others, including several bayonet Zeus RTA RTA to the top, as we have seen. I like this method, only a quarter turn and hat. Having a metal plate with two ports kidney shaped load so large that each bottle will adapt and fill quickly and disorder. A link to the top cover after filling, again, is only a quarter turn.
air flow inlet is in the base, which is like having a double Cyclops in BLOTTO not accept the open slot, it has a honeycomb airflow, line 2 comprises a total of 26 holes on each side. ring control air flow and cap when set only poor quality that do not meet the RTA because it is very vague and moves very smoothly once.
Air enters through the holes airflow explained and enter the bottom platform, just below where reel / coil will be placed, have style output grid (slots narrow) and increase hand curved to match with reel / coil outer contour ramps have more air outlets of the hive. The airflow is described as “242 ° directly into the coil system airflow” lol I do not know how the scientific process to measure 242 degrees, but let’s say your reel / coil will have a lot of air cover (not to be confused with a lot of air).
We have a floating platform in dovpo basium squonk click in and although he did not reel postless the main deck is equipped with the same, but only a slight slope down instead of screws also declined slightly tilted. We have two main post section, comprising the structure of the flow path of air which face each other and each part is divided between negative and positive, and the two lead get mounted thereon. The headless screw Flatheads my least favorite because I find the checklist and the will of many favorite hexagonal.We made three construction during use cast construction double 3.0ID Ni80 Claptons is shown as seen was a little tight and recommend more than twice the construction of which made using 2.5ID coil. Construction is simple, since the use of the coil 3.5ID, which worked fine, but next I would try a building with 4.0ID 4.5ID then because in the future I will use as a single coil and BLOTTO RTA I want to find the best construction.
A bottle opener is provided double as guide for cutting the cutting wire carrying the correct length (twice the building), personally use the directory search for cutting cylinder included with some of the RTA and RDA and cut May 1 mm I found led me on the right to build a double if required a single build its prospects a little more, but you should use based on your reel handle his judgment.
Mecha is easy (I love the platform floating GTA style) that the containment of the process of what you just put a piece of cotton in the channels and allow gravity absorbed once the swab for the rest of this BLOTTO very forgiving with the wick!
As mentioned, did build three, two double and single and the first program to me that a single coil construction gives a high yield, so the dovpo 230w get code to build give poor single and double results with a single accumulation two.I stood for me was the smoothness of BLOTTO but I found a nest bee air flow do not expect half. As it mentioned in the previous section that all the ingredients are there to get a good taste and even the taste was very good with the three accumulation I do, but enough have raptures some people, but just could not discovered accumulation and reach to be much simpler coil fan experiment I with different 4.0ID and 4.5ID next version is perfect.
I prefer higher air flow RTA because I hate e-liquid to get my camera, but after some use experienced zero leakage and there is also good bridge flood. I made the third to build a great wrong, I’m a little worried about the double 3.0ID construction because there are plenty of cotton and all I’m doing is the end of the boom so that no comb, using the mail-liquid and 80VG it was bad good without some arrangement.
I really do not recommend it to someone who is new to build some experience would be beneficial prior to construction in vapeciga topside dual mod but good if you like a challenge, dive right!
Good build quality
See unique cap
It’s good to see RTA (subjective)
It works well with either double or single construction
Postless setting style coils
cover 242 degrees of airflow
Goon beautiful assembly 810 for advanced drip
2 bubbles 6ml including spare parts (1 cup, Ultem 1)
cutting bottle opening guide / coil wire including
Top-cap has a bayonet connection (only a quarter turn to open or secure)
If you like this vaporizer should be limited up your street
very good taste (although I have not found so extraordinary as many others)
Very smooth airflow
Very lenient with evacuation
Suffering from zero leakage or flooding
Not suitable for people who like a lot of air (much more limited than most DL RTA)
No coil or cotton plug
510 adapter is not included
dripless drop advanced CA including
A single backup of the screw and O-ring
Actually, it is not recommended for someone new to the accumulation (narrow space and the need to pre-cut lead)
Is the favorite hex screw
3.0ID limited to two coils accumulation (and even that is quite narrow 2.5ID much better)
control ring airflow some unspecific movement
I would like to thank again as the Pearl of the Cigabuy to supply BLOTTO RTA for the purposes of this review.
You can buy here:dovpo box https://www.vapeciga.com/collections/dovpo