Voopoo Drag 2 Review: A Worthy Successor to the Drag TC Mod 177W

Vapeciga Voopoo Drag 2 has a double 18650 Drag 2 mod and UFOrce ohm T2 below the tank. Drag the original is the best selling for many reasons: it comes with a very specific biochips, start crazy fire rapid fire fast 0.01 seconds, all at a very affordable price. That said, it has drawbacks, since even atomizers 24 mm protrude slightly, the battery lid has a little play and paint the black version is prone to scratching and wear.

 

Let’s see if and how to slide 2 directions of these problems and how the general options of the kit.

 

Price: $ 69.95 Personal (in MyVPro)

Color: dawn, fire, fiery clouds, auroras, ink, red, puzzles, island

 

specification

The strength of the range of 5-177 watts

Resting time: ≤10uA

Output voltage: 0 to 7.5 volts

Output current: 0-40 Ampere

Batteries: 2 x 18650

resistance range: 0.05 to 5 ohms

Temperature range: 100-315 ° C / 200-600 ° F

the update function: Yes

Weight: 158 (± 2) g

Material: zinc alloy and resin

 

The contents of the kit

DRAG 2 177W

T2 UFOrce (5 ml)

UFOrce U2 (pre-installed)

UFOrce N3 (included)

the glass tube (3.5 ml)

O-ring x 7

USB Cable

GENE smartcard

guide

Warranty card

mod: Drag 2

Slide Vapeciga Voopoo Vinci reviews

Slide 2 is a double-18650 mod fires up to 177 watts. It appears only in black, but with different color options to choose from or resin. I received a “cloud of fire” one that unfortunately my least favorite of the group. Still looks good, it’s just that others will look better in my opinion. Fortunately, the white part of big brand behind the DRAG mod softened slightly compared to the original, offering a more cautious view. And the edges are rounded at the time, much more fun to continue.

 

mod weighs 157 grams, about 50 grams lighter than the original slide. The paint job was much better too; Drag Me OG scratches on the square, but it seems they have now solved this problem. battery cover magnet is very strong, but as the first drag, there is a small play there. No rattle or something like that, but you can manually move the door.

 

The screen is good; clear and easy to read, but relatively small black and white. These keys are dislocated and feel they have also improved since the original slide. Atomizers with a diameter of 25 mm sit flush with the plate, but there is a small space 510 as raised platforms. Frankly, I do not know why they went with this design. You can take a while to notice, but after most likely be bothered I am.

 

Information Display

 

dual battery monitoring

Resistance

voltage

the duration of the breath

fashion

Surgery

 

Five click the button to turn the device on and off

Three clicks to change modes (power, FIT, CT – Custom Mode is the submenu)

Pressing the + and – keys will take you to a submenu from any mode

While the TC mode: 4 clicks to adjust Watts

While in measuring mode: 4 Click to adjust the power curve or temperature

lock fire + (still burning)

Fire – change screen orientation

 

menu options

 

Supply mode submenu: M (Custom mode), SN (serial number), SEE (firmware)

submenu TC: M (custom mode), Ω-assembly (series resistance), F (established TCR)

The menu system takes some getting used to, but I would not say it’s complicated. MOD adjustment with the addition of 1 watt, but the acceleration and not round. It is quite fast though.

 

Gene chip known power and precision of the performance mode and drag 2 very good. air conditioning, however, is meh. A the same as with the Voopoo Too show new, I found having excellent dry protection and temperatures reached more or less accurate overall, but TCR exclusive and most importantly numbering, the limit of 80 watts TC a major drawback. If one considers the use of control vaping temperature exotic slide 2 with the coil, you may be disappointed. It’s good for the rolls MTL style however, because no additional energy and default working on stainless steel TCR is needed.

 

This mod is also the FIT mode, which comes with three presets: Flt1 (drums), FIT2 (taste) and Flt3 (cloud). After playing with it for a while, I think the only thing to do is read the appropriate strength and power, with FIT1 be low power, medium and high FIT2 Flt3. Voopoo recommends using the FIT UFOrce mode in the tank, but trying on the reel, including tank T2 UFOrce arrived disappointing vaporizer. They also say that the method does not refer to repairable ago; I tried it on a MTL coil 0.7 Ohm, and I think that was fired was significantly higher than what I want. In my opinion, the definition of fashion is a hit-or-miss, and have found no real use for it.

 

Tank T2 UFOrce

Slide Voopoo 2 reviews

I like the look of UFOrce T2, adopting a kind of minimalist design that makes it look more “professional” than the average low ohms tank you. It is approximately 25 mm, the substance, glass bubbles with an additional 3 mm. Spread over T1, I can see some minor differences. Three slot slightly greater airflow, and was replaced by knurled carved geometric shapes, which look much better in my opinion. In addition, 5 mL glass bubble looks like a very good fit, it is something that can not be said of all secondary ohms deposit there. Capacity decreased to 3.5 ml with a straight glass, but the tank is also compatible with the rest of the glass tank Voopoo Drag get code to 8 ml.

 

This tank has fill port Boy pressure; He tilting the bottle at an angle of filling. by advanced drip is 810, but both double O-ring, and the tank is not compatible with most Goon 810S style. I do not understand this design option – I have some tips and dozens Goon drops this style, and I’m sure this is the case for many vapers there.

 

coils

 

U2 two parallel coils 40-80 nominal 0.4 ohm / best watts: 55-65 watts (included)

N3 triple net nominal 0.2 ohm coils 65-100 watts / best: 75-85 watts (included)

Compatible with U2 / U4 coils / U6 / U8 / N1 / N2 / N3 / R2 / D4

There is also a rebuildable coil (R1), but I think Voopoo stop producing because it is out of stock everywhere I checked.

 

The airflow is T2 UFOrce much more limited than the three slots of the air stream to make us believe. Fully opened compared to freemax Pro airflow mesh with less than half open. For me it was the perfect amount of airflow, but if you like the lungs directly super wide sweater you may want to look elsewhere.

 

triple net product reel flavors were very good and a dense steam. Voopoo watts nailed recommendation, because I found better results cooking about 75-80 watts. It is also the hub of very good, although beginning to suffer a little more than 90 watts with high VG me juice. Do not forget before its first use; there are a lot of cotton between the three bands of mesh and it will take long for the e-juice to reach this area if it is not properly primed. No retrograde drainage or gurgling, and the tank is not leaking at all, even if left open overnight.

 

double parallel coil is a bit of a flashback, but an average coil watts remained excellent. Very good flavor and a good choice for use with single battery mod UFOrce T2; and the other coil, Vapeciga Voopoo PNP precisely recommends a range of 55-65 watts. Beyond that, I prefer the triple helical mesh is better overall and will last just a little longer.

 

pros and cons

There is no wrong with tank 25 mm

Working painting update

round tip

Lighter than original slide

fast and accurate fire

various resin panels to choose

great flavor and a dense vapor outside coil triple net

Dual coil parallel is the use of media watts

Fully customizable and smoother airflow

raised platform 510 that creates a gap

Limit Mode Watts TC

Touching the battery cover

FIT is the way to beat empiricism

The deposit is not compatible with fashion tips Goon

Some may find the air flow T2 somewhat limited

 

Decision

My biggest problem with the Drag 2 mod is the vacuum created by the lifting platform 510, followed by reading the battery cover. If you do not mind the inconvenience, and if you will not be using TC mode high power, then there are chances that you will enjoy it. The price is reasonable, accurate and smart home fixes some problems of its bestselling predecessor. Just Swipe innovative as the original, but it does the job. A pleasant surprise came from UFOrce tank T2, which exceeded my expectations with its triple coil mesh. With the kit priced at only $ 10 more than the model itself, it is obvious.

 

The voopoo vinci click in slide set in increments of 1 watt, which I personally like, but not the round robin and move slowly when you write are met. yes Mod quality construction is dropwise a mixture of things. No keys Rattle, enumerating 1.8A charge rate level. I did some basic tests with USB meter line and the more I get is 1.6A for what I consider to have been accurately evaluated. They list 4400mAh battery which means the possibility of two 2200mAh cells that we know is a series. I have no way to prove it, but in normal life of battery usage is one of the best ever obtained from a model of the internal battery. Moreover, there is no charge cycle that turns on and off all the time to recharge similar compared to most mods constant load. I think this was done to protect the battery and allows a higher level of costs and is not much, but it’s worth mentioning.

 

paint the best kept model for me then slide 2. Slide 2 all colors have a black frame. I can get normal wear at the bottom, but has not had me flaking and scratching with slide 2. I do not know why it went better in person. nice and beautiful resin. I hope they use the door on the other side of the resin and not a logo drag the giant door. trigger buttons are a good size and nice concave circle and dislocation. It works well and never got stuck or anything though as it should. 510 pin has given me any problems and use spray every in and done well and built, but is a bit high and does not feel empty all sprays seem to have a crack. Mod atomizer flush handle 24 mm with beveled edges. 510 is not placed in the middle, for whatever reason, is almost in the center, but later, and then back. the screen is a screen in black and white as small as the original route. It is also little strange. I noticed even all the way around the software and still is a bit low. Screen disappointing for sure. I would have liked a better screen. There is also bent over her dragging screen 2. In addition to the logo mod own brand without big attraction at the top of the battery fan not all. resin panel is supposed to match the other side.

What do you think of the kit slide 2? Please let me know in the comments.

You can buy here:voopoo  https://www.vapeciga.com/collections/voopoo

sourcemore thanks

 

Leave a Reply

Your email address will not be published. Required fields are marked *